SMECO newsletter

volume 67 - issue 12 - December 2017

Prepare for higher electric bills as it gets colder

The winter season is upon us and, as the temperatures outside drop, electric bills will rise. Heating and cooling costs are usually the biggest part of your electric bill, accounting for up to two-thirds of your usage. When it gets cold, energy usage increases. When energy usage increases, electric bills go up.

Knowing the type of heating and cooling system you have, how the system works, and how to properly maintain it will help you get the most efficiency from your system. The most common type of heating system in the local area is an air source heat pump.

A heat pump system transfers heat from one location to another. In the winter, heat energy is absorbed from the outside air and used to warm the inside air.

Heat pump systems need to be serviced annually by an HVAC technician to operate at peak efficiency. Here are some additional tips to get the most efficient service from your system:

• Clean or change filters once a month, or as recommended by the manufacturer.

• Never set thermostat to emergency heat unless the outdoor unit stops working, then call your HVAC technician immediately.

• Keep thermostat heat settings at one temperature. The recommended setting for winter is 68°F.

• Heat pumps need to breathe, so keep all vents open and free from blockages inside the home.

• Keep the outdoor unit free from snow, ice, and leaves.

• Keep plants, shrubs, and other obstacles at least two feet away from the outside unit.

• Replace older thermostats with programmable models—ask your HVAC technician which will work best.

Other common heating systems include gas or oil systems, which generate heat from a furnace or boiler. A furnace heats the air and blows it through heat ducts to the registers or grilles in the home. A boiler heats water, and the water is circulated through pipes to radiators or baseboards.

Getting the most efficient use out of a gas or oil system requires some maintenance, as well.

• Keep radiators or convectors clean.

• Replace or clean the filter on a forced-air system at least once a month.

• Check flue and chimney for possible obstruction and have cleaned, if necessary.

• Have oil furnaces serviced yearly by a trained technician.

• Have gas furnaces serviced every two years by a trained service technician.

Keep safety in mind, too. A poorly maintained or malfunctioning gas or oil furnace can produce dangerous levels of carbon monoxide. It is recommended that any home with a gas or oil system have a carbon monoxide detector.

Electric baseboard heating systems use resistance heating like electric stoves and space heaters. This is the most expensive form of heating, so use it as sparingly as possible. Turn off baseboard heaters in unoccupied rooms.

Knowing the type of heating system you have and maintaining it properly will help you save energy and money as the weather turns cold.